Consolidated Statutes and Regulations
Consolidated Statutes
Consolidated Regulations
Annual Statutes and Regulations
Annual Statutes
Annual Regulations
Additional information
Québec Official Publisher
What’s new?
Information note
Policy of the Minister of Justice
Laws: Amendments
Laws: Provisions not in force
Laws: Provisions brought into force
Annual Statutes: PDF versions since 1996
Regulations: Amendments
Annual Regulations: PDF versions since 1996
Court Decisions
Q-2, r. 35.3.01 - Regulation respecting manure anaerobic digestion projects eligible for the issuance of offset credits
Section 35
Disposition versions
35. When the verification of the accuracy of the measurement instruments in accordance with section 34 shows that the mass or volume of inputs at the charging scales or level detectors, the volumetric flows of biogas at the flow meters, or the CH4 concentrations at the CH4 analyzers have a relative error outside the +/-5% range, the promoter must take the necessary corrective actions, such as cleaning or adjusting the sensor on the instruments, as specified by the manufacturer. The promoter must then verify the accuracy of the instruments again in accordance with section 34.
When the corrective actions taken by the promoter do not, following a new verification, ensure that the instruments can maintain a relative error within the +/-5% range, the promoter must have the instruments calibrated by the manufacturer or by a third party certified by the manufacturer. The calibration must be performed not more than 2 months after the end date of the reporting period for which quantification is carried out.
In force: 2023-12-28
35. When the verification of the accuracy of the measurement instruments in accordance with section 34 shows that the mass or volume of inputs at the charging scales or level detectors, the volumetric flows of biogas at the flow meters, or the CH4 concentrations at the CH4 analyzers have a relative error outside the +/-5% range, the promoter must take the necessary corrective actions, such as cleaning or adjusting the sensor on the instruments, as specified by the manufacturer. The promoter must then verify the accuracy of the instruments again in accordance with section 34.
When the corrective actions taken by the promoter do not, following a new verification, ensure that the instruments can maintain a relative error within the +/-5% range, the promoter must have the instruments calibrated by the manufacturer or by a third party certified by the manufacturer. The calibration must be performed not more than 2 months after the end date of the reporting period for which quantification is carried out.
